Hack N95, N82, E70, 5500 - s60 9.1 or 9.2
This is a procedure only for Symbians s60 9.2, which can be made by following these steps.
If you think it's too complicated, you may prefer to hack Updating the Firmware 30: www.n95br.com/atual
And doing the procedure End of Signature: www.n95br.com/sign
1 -) Download ActivePython and install it on your PC: http://www.easy-share.com/1905881471/ActivePython.msi
2 -) pyserial Download and install it on your PC: http://www.easy-share.com/1905881387/PySerial.exe
3 -) AppTRK Download and install it on your mobile: http://www.easy-share.com/1905881386/AppTRK.sisx
4 -) Download the Hack Perms and save it to any folder on your PC: http://www.easy-share.com/1905881385/Hack Perms.py
5 -) Connect your phone to PC via USB cable using the "PC Suite";
6 -) Now with the phone connected go to Control Panel> System, go to the Hardware tab and then click Device Manager device list and click the plus sign (+) next to the item Ports (COM & LPT .) Should appear just below Nokia GSM Phone USB and COM port number it is using brackets can also be written and model of your Nokia phone in front, you will identify easily ... well, write down or memorize the COM port number being used. See the figure below as an example:
Tip: If not the port number in parentheses, take two clicks on the name of your phone, the new window select the tab "Port Settings" and click "Advanced ...", now you should see the port number used right at the bottom of the new window.
7 -) Now, on your phone, open the AppTRK and when he tries to connect via bluetooth cancel. Press Options> Settings> Connection and switch to USB. Back, press Options again and then Connect. The AppTRK should look like this:
8 -) Now on your PC, open the "Hack Perms" (hack_perms_s60v3_FP1.py) with Notepad and search (CTRL + F) to "be =" without the quotes of course. Along the lines of "be =" you will soon see the front says "serial.Serial (5)", replace the number 5 by the COM port number you had noted in step 6 minus (-) 1. That is, if the port is used for its cell 10, you put between the brackets 9, where 8 places 7, and so on. Now Save the file, just give "Save" rather than "Save As ..." See the figure the exact location of the exchange's port number:
 | This image has been resized to see it in original size click on this bar. Original Size: 725 × 471. |
9 -) Now let's hack even the damned, now you just take two clicks on the file hack_perms_s60v3_FP1.py (which is already tied and will open the ActivePython), will open a DOS window, wait about 5 seconds until the execution of the script and you should see something like the window!!!!! candidate!!!!!. If you see this message it means that hacking it worked!
| This image has been resized to see it in original size click on this bar. Original Size: 668 × 331. |
Up here, your phone is hacked and have access to previously unreachable system folders. However, when the hack off the phone wears off and the whole procedure had to be done again. But I've found a solution to this, we will now automate the hacking by the phone itself, no longer needing the PC to it, turning on and off when hacking suits us well;
10 -) Download these files, unzip and copy them to a folder on your phone;
11 -) Using your file explorer on your phone (I prefer the X-plore) CProfDriver_SISX.ldd copy the file into the folder C: sysbin your phone. Note: This is only possible with the phone now because hackeao this folder is inaccessible without the hack.
12 -) Install applications and CapsOn.sisx CapsOff.sisx on your mobile. e p ara desativar o hack basta abrir o aplicativo CapsOn . There you go now to activate the hack you simply open the application and p ara CapsOff disable the hack just open the application CapsOn. I suggest that you activate the hack just to install the applications to be signed with the procedure we learn then, and as soon as you finish sign and install the applications you disable the hack, that to protect your phone, because you have access to folders vital system, previously inaccessible, may accidentally delete or modify any of these folders and permanently damage your phone. Be warned.
SIGNING AND INSTALLING "ANY" HACKEADO APPLICATION IN YOUR MOBILE WITH PREVIOUS PROCEDURE:
1 -) MobileSigner Download and install it on your phone;
2 -) Download the file "00000001" and save it to any folder on your phone;
3) Using your file explorer go to the folder C: RESOURCE his cell and within it create a new folder called "swicertstore" (without quotes). Inside the folder "swicertstore" create a new folder called "dat". Now copy the file "00000001" folder into the "dat" you just created.
4 -) Now, go back and select the "swicertstore" and through your file explorer to change the attribute of the folder, making this folder "read only" or "read-only" if you prefer. Each explorer is one way to do So discover your in X-plore the folder being selected simply press the number 6 and choose the attribute.
5 -) Do the same procedure as above in the "dat" and the file "00000001", making them read-only.
6 -) Now, download this file and unzip it. Go to the folder C: privateEC696702 into it and copy the 2 files previously extracted, confirming the replacement of files if you are asked.
7 -) Finally, we now sign our applications. Copy to a folder in your phone number (s) application (s) to be (in) signed and installed. Open the application installed on MobileSigner start the application and select it to be signed by pushing the joystick in the "Sis File" and browsing to where the application to be installed. Then press Option> SelfSign. Wait a few seconds until the application is signed, if it is large and may take a little MobileSigner gives a travadinha. Upon receiving the message "Operation Success" will create a copy of the application in the same folder as he was, but with the extension. "SISX" and this copy will be your application is already signed and ready to be installed without restrictions.
In time, you no longer need to activate the Hack to sign your applications and install them. The hack of the phone was only necessary to access the folders where I made ​​the changes to the second part of the tutorial.
Source: PlugGSM
The article is usefull for me. I'll be coming back to your blog.
hello am new here and I wonder if anyone knows how do I release the lisença my N96
software: 11,101
RM: 247
Soon all will be posting tutorials on how to hack all S60v3 and v5 Symbians! Wait, very soon!
This serves to tutorial N95 - 3 (MR 160), with the last firmware (20.2.011)
not only for FW ... 31 .... Please see the first STARTED!
And this is how to hack my phone? I do not think anything about this firmware ...
make the corresponding process of v30 ... if it works let me know.
Good evening I have the n95-2 8g. this procedure is?
yes ..... but see First Steps first, lol.
or other please show me it is version 30.0.018 rm-320
where low 000,001?
00,001? q it? all files are here!
1 -) MobileSigner Download and install it on your phone;
2 -) Download the file "00000001" and save it to any folder on your phone;
not have any links on any word in the two paragraphs of the post ..
Hello,
When I go to install some applications cerftificado error, and these same problems,
I need to hack it?
The version of my N95 is 31.0.017 - 16/12/08 - RM 159,
yes need, see the GETTING STARTED!
Ñ ​​I connect my N95 8Gb - 4 pc suit mode
how to know if is my N95-1, N95-2, etc. and what version of Symbian? to want to hack but lost about it because I do not know how to check
It yes: http://www.n95br.com/modelos-n95/
my face is n95-3 version is 20.2.011 FACE LIKE THIS TRAIN DO PRA RAKEA THAT WORKS UP TO AID IN THIS CASE??
GETTING STARTED see the first! there explains everything in detail!
0001 linked file.
http://www.gsmmasters.com.br/forums/showthread.php?t=11763
In my failed, time to click the Hack Perms 2x, the screen DOS but shows no message .. the screen shows that DOS does not last even 1 sec right.
This procedure serves to n9-1
which files are the ones that appear to download and then extrailos. says there are two files that have a + al link.posta please!!
Its hack the N95 8GB V 32.2.001 (RAM 421)?
Good afternoon!
Please give me a help! I've tried several times, calmly and nothing! At the end when taking two clicks in Hackperms it does not open the DOS screen, but a white screen with the following message:
This program connects to a Nokia Phone using Symbian 9 and tries to set the flag to allow all permissions
# MetroTRK driver it needs to be running on mobile, and a connection Between PC and phone
# Read for details instructions.txt
# http://FCA00000.googlepages.com/romtools-v0.2.2.rar might also be useful
# History: 03/13/2008 v0.2a by swmail
# Work on UIQ3 (Tested on SE P1i, FW R6G04).
Includes # timeout for the reading of serial port (1s.)
# First will be tested address 0 × 60000148 and after this, nothing When found, the memory will be scaned.
# Modified from SW
# History: 2008.03.12 v0.2 Does not need to run now because HelloCarbide.exe ekern uses the thread.
# Also includes an example to dump the file into memory
# Also tries to read memory using DS_MSG_MEMORY_PROTECTED + DS_MSG_MEMORY_SEGMENTED. With and without a process. Let's see if it works
# History: 03/10/2008 v0.1 Includes a memory scan to try to find the address in FP1 (N95, N82, ...)
# History: 03/08/2008 v0.0
# License: GPL. Please contact me if you make corrections
# Author: FCA00000-at-yahoo-dot-es
Thank you so much right now who can give me a hand!
Welcome and THANK YOU for providing the tutorial!
The download links MobileSigner, 00000001, AppTRK, Hack Perms, no longer exist.
Can someone pass me?
I have a n95-1 but naum can hack it. I downloaded all the software applications in this tutorial, but the app trk naum install on my cell phone. The certificate invalid or something. Can you help? Vlw!
Look on my N95 8GB did not work ... and I've tried over 30 times and reviewed everything ... when I click two times in the file hack_perms_s60v3_FP1.py nothing happens even though I changed the door ... please if someone can help me I thank much!!
Works on E71-3?
Friend trying to download the link 2 -) pyserial Download and install it on your PC: http://www.easy-share.com/1905881387/PySerial.exe
but not getting to the file server was taken, and I depend on to hack a n95 so I can talk to install the visually impaired. if you can help me thank you. big hug
I was wondering ... which serves to hack the phone ... I have the n95 4gb gray one ... so far not seen a need for it ...
what are the reasons to hack your cell phone?
** YOUTUBE VIDEO REVIEWS ON THE HOTTEST ELECTRONICS OUT ** ...
# 1 SITE FOR THE LATEST REVIEWS ON THE HOTTEST TECHNOLOGY Hitting the MAINSTREAM! ...
** YOUTUBE VIDEO REVIEWS ON THE HOTTEST ELECTRONICS OUT ** ...
# 1 SITE FOR THE LATEST REVIEWS ON THE HOTTEST TECHNOLOGY Hitting the MAINSTREAM! ...
MOST INFORMATIVE SITE FOR ELECTRONICS ....
** YOUTUBE VIDEO REVIEWS ON THE HOTTEST ELECTRONICS OUT ** ...